| Parameters |
Specifications |
| Optimized Wavelength Range |
1540 – 1565 nm |
| Gain Flattening Filter |
Not included |
| Optical Input Signal |
Optical Input Signal -10 to +10 dBm average power, 1550 nm |
| Optical Output Power |
+34 dBm, tested with 1550 nm, -6 dBm input |
| Gain |
30 dB to 40 dBm, tested with 1550 nm, -6 dBm input |
| Optical Input Fiber |
900 um OD, FC/APC cable, blue, 1 ± 0.1 meter |
| Optical Output Fiber |
900 um OD, FC/APC cable, red, 1 ± 0.1 meter |
| Input Power Monitoring |
Included |
| Output Power Monitoring Range |
+20 to +34 dBm |
| Output Power Measurement Accuracy |
≤ +/- 0.3dB, calibrated with 1550 nm continuous wave output |
| Noise Figure |
≤ 6.0 dB, tested with 1550 nm, -6 dBm input and +34 dBm output power operation |
| Optical Input isolator |
Included |
| Optical Output isolator |
Included |
| Control and Communication Interface |
RS-232, UART LVTTL Level from unit itself, RS-232 level from the external breakout interface card PCB-1912-IFC |
| Dimension |
5.12 x 4.92 x 0.59 inch [130 x 125 x 15 mm] |
| Power Input |
Power Input +5 to +5.25 VDC |
| Electrical Power Consumption |
≤ 30 W |
| Operational Case Temperature Range |
5 to +60 °C |
| Mode of Operation |
AOPC (constant output power control), ACC (constant pump current control) |
