+1-951-696-8366

RamanPump-RS-900-FCA

Raman amplifiers leverage the Raman effect, where photons interact with the vibrational modes of the fiber to amplify signals. These amplifiers provide several key advantages, including increased signal range and bandwidth, lower noise, and reduced signal degradation. Raman amplifiers enable long-haul transmission without the need for costly signal regeneration, enhancing overall system efficiency and reliability. They are essential in wavelength-division multiplexing (WDM) networks, allowing multiple signals to be transmitted simultaneously over a single fiber. Moreover, Raman pump-based amplifiers facilitate the realization of high-capacity, low-latency, and future-proof optical communication infrastructures.

SKU: 1806_1 Category:

Description

Parameters Specifications
 Wavelength of Pump Laser  1425, 1435, 1455, and 1465 nm 4-wavelength combined pump source
 Polarization Maintaining Property  1425 nm and 1435 nm polarization multiplexed as pump source group 1.

1455 nm and 1465 nm polarization multiplexed as pump source group 2.

Group 1 and group 2 are wavelength multiplexed as the overall pump power output

 Output Pump Power FC/APC 3mm jacketed Optical Cable  100 to 900 mW tunable; pump power at each wavelength is tunable 25 mW to 225 mW
 FC/APC Output Cable #1 3mm jacket fiber cable with FC/APC connector. Provide up to 900mW 14xxnm pump power
 FC/APC Output Cable #2 900um jacket fiber cable with FC/APC connector. Pump power output tap
 FC/APC Output Cable #3 900um jacket fiber cable with FC/APC connector. C-band Optical Output for backward-pumping scheme
 FC/APC Input Cable #4 900um jacket fiber cable with FC/APC connector. C-band Optical Input for forward-pumping scheme
 1550 nm power monitoring, backward direction  Included
 1550 nm power monitoring, forward direction  Included
 14xx nm forward pump power monitoring  Included
 Backward direction pump power monitoring  Included
 Control and Communication Interface  RS-232
 Dimension  7.1 x 4.9 x 1.36 inches
 Power Input  +5 VDC +/- 5%
 Operational Case Temperature Range  -5 to +70°C
 Mode of Operation  ACC (constant pump current control)